- MODEL NO: CS-HG400-9 - SERIES: SHIMANO ALIVIO M4000 Series - Compatible chain: HG 9-speed - Speeds: 9-speed - Type: HG

Oury single sided V2 lock-on grips.

SRAM's PG-1030 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette is available in four configurations perfect for riding off road, including one with a 36-tooth largest cog for super-easy climbing.

Need a non-quick-release seatpost collar with some major bling? Then Salsa's Lip-Locks are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette.

The DEITY Highside 35mm handlebar is an homage to style and skill. The DJ/Slopestyle ready Highside 760 handlebar is the perfect reflection of what listening to the athletes can create. This design allows for a stiff, responsive feel that sets the stage to bring your style to life or life to style. - 7075 T73 Gradient butted aluminum - Full bead blast finish for increased durability and fatigue resistance

The Cambium C19 All Weather Carved is a wider saddle made for an upright riding position. It features a hole for pressure relief and additional flex, eliminating contact points which cause discomfort for some riders. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride,” thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. The updated fiberglass reinforced backplate has loops for a saddle bag or other riding accessories. - Vulcanized natural rubber and nylon top - Steel rails with a reinforced plastic backplate - Length: 275mm - Width: 184mm - Height: 52mm - Weight: 490g

Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings. - 352 grams (pair)

The PC-951 is SRAM's most economical PowerChain and maintains their high standards of quality. It boasts tough chrome-hardened pins for durability and accurate shifting. And, with its great PowerLink, you don’t even need tools to install it.

More comfort, more control. Superlight and durable, and optimized for vibration absorption using EVA foam and QuellGel Silicone, the perfect all-day handlebar tape. Where it thrives: The open road, out in the elements What it's built for: Comfort, grip Highlights: - Lightweight EVA foam with a 4mm QuellGel silicone layer provides extra comfort and improved grip feel - Non-slip suede-effect finish for control in all conditions, rain or shine / Includes: 2x tape rolls, lever strips, bar end-plugs, and finishing strips - Thickness: 4mm, length: 200cm, weight: 102g

Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability. - 380 grams (pair)

For reliable mountain bike shifting, Shimano's SL-M315 RAPIDFIRE shift lever is suited to quick shifting, giving riders the ability to downshift three gears in one stroke. - Slim main lever body - OPTISLICK for smooth shifting performance - Gear display positioned below the handlebar - Numbered gear display indicates gear position at a glance - Light shifting operation, wider compatibility, and suitable for internal cable routing - Streamlined cockpit experience

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

Downhillers and freeriders need tough gear that can handle the abuse of big air and huge drops. TruVativ's Giga Pipe Team DH Bottom Bracket uses four sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

Get connected to your daily ride with MSW's MP-100 Dual-Sided Clipless Pedals. They feature dual-sided entry so clipping in quickly is a snap, and the adjustable spring tension lets you customize exactly how much force it takes to unclip. These no-nonsense pedals are stellar in all conditions, and when the going gets sloppy, the mud-shedding design ensures you can still get in and out of your pedals quickly and easily.

FSA MegaExo Bottom Brackets - MegaExo cranks to press fit BB86 frame - Spindle Interface Type: FSA MegaExo - BB Shell Width: 86mm - Bottom Bracket Shell I.D.: 41 - BB/Frame Interface: BB86

Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

- Replaces existing top cap, and allows the use of a bottle cap as a decorative cover - Compatible with both twist off and crimped style bottle caps - Bottle cap is held in place by two strong magnets - Easy to switch out bottle caps - AL6061 alloy cap and AL7075 alloy bolt

ISIS revolutionized bottom bracket spindles. Keep yours spinning smoothly with this Platinum ISIS Bottom Bracket from FSA. - Forged, hollow chromoly spindle with titanium nitride coating - Integrated, large ball bearing design - Cold-forged aluminum cups - Includes crank bolts

Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Replacement rear dropout Axle Stud Kit for Carbon V2 Beargrease, Warbird, and Warroad Frames. - Thread diameter and pitch: 12x1.5mm

FSA PowerPro JIS Cartridge Bottom Brackets. - Includes bolts - Spindle Interface Type: Square Taper JIS - BB Shell Width (mm): 68 - BB/Frame Interface: English

Thomson's Elite Setback Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.

An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes. - Four rise options available from 30-100mm - AL-6061 aluminum alloy - ISO4210 Safety Tested for City/Trekking use - Not recommended for use with bar-ends or clip-on aero bars - 15-degree sweep

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC44/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 65g

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Shimano's Ultegra bottom bracket uses Pro Tour-proven technology for lighter weight and super smooth spinning, while still maintaining the same level of durability and stiffness. It's available in English, Italian, or Press Fit models.

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No

Precise and easy to use, SRAM's Apex 1 flat bar shifter places a wide range of available gears right at your fingertip. - Exact Actuation technology for precise and dependable 11-speed performance - Weight: 142 grams - Speeds: 1 x 11 - Recommend Group: SRAM Apex 1 - Color: Black

Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

- DT Swiss cartridge bearings - Sold in pairs

Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

Note: This is a CAMO Chainring ONLY. A CAMO Spider is required to complete this system. The CAMO chainring system was created by the Wolf Tooth engineers for Chainline And Material Optimization on direct mount style Chainrings. The key advantages include: - Perfect chainline - for wear and shifting precision - Optimal material usage - for weight, stiffness, and wear - Price - for less expensive replacement chainrings - Swapping - Very fast chainring change out with 5 small bolts and no nuts. - Availability - Wolf Tooth is the one-stop-shop for your direct mount needs...round or oval, stainless or aluminum, and no matter the crankset. - Bling!! - spider colors and bolt colors add a little flash to your sweet ride. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability Compatibility: - This is a chainring for the Wolf Tooth CAMO spiders. It is NOT compatible with any other chainring mountings. - The CAMO spiders come with Stainless Steel Bolts. - For 1x9, 1x10, ,1x11 and 1x12 drivetrains (including SRAM Eagle) If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Chainline - varies by which spider you choose - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP B - Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC - Not compatible with 12spd Shimano HG+ chains DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommended - A clutch style rear derailleur will be best for chain security. - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 28t/ 25g | 30t/ 35g | 32t/41g | 34t/48g | 36t/57g | 38t/66g - Material: 7075-T6 aluminum - Made in USA

Slightly thicker than the Razer Grips, slightly thinner than the Fat Paw Grips, these 6.5mm thick grips are great for longer rides, as they reduce hand fatigue and finger numbness. - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - 6.5mm thick

Float Relaxed is an anatomic saddle with a central opening designed for greater relief in the pubic area. A slow-moving memory foam padding, Slow Fit Foam, provides superior comfort by adapting to the body and creating a more uniform weight distribution. Slow Fit Foam With its unique slow recovery property, this memory foam provides superior comfort by molding itself to fit the shape of the body's contact points, creating more uniform pressure distribution while maintaining effective support. Integrated Clip System A patented clip system positioned at the rear of the saddle for easy attachment of a Selle Royal saddle bag or other accessory. Elastomers Absorbing even the most severe and unexpected shocks, elastomers work both vertically and horizontally for safe, silent and permanently non-deformable performance.

Kit Includes premium components: - Inner cartridge bearing x 2 - Outer cartridge bearing x 2 - Igus solid bearing x 2 - Inner seal x 2 - Bearing locknut x 2 - Spindle screw (Left) x 1 - Spindle screw (Right) x 1

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams

Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

- 3-piece expander design provides a secure fit within carbon steerer tubes - 22-25mm range of expansion - 50mm height reinforces carbon steerer tube beneath the stem - New design evenly distributes headset compression forces - Lightweight AL6061 alloy construction - Stainless steel bolt

- Model Number: RD-R3000-GS - Series: SORA - Maximum Sprocket: 34T - Minimum Sprocket: 11T - Maximum Front Difference: 20T - Total Capacity: 43T

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Based on the popular ST Core Prime shape comes the all-new ST Gel. The ST Gel is designed for a more cost-conscious rider. The orthopedic comfort foam provides a high level of support and comfort over long distances. The gel pads guarantee additional comfort around the sit bones. The relief surfaces are gender specific.

SRAM's GX 2x10 Crankset w/All Mountain Chainguard delivers consistent performance every time out. Featuring SRAM’s X-GLIDE chainrings, the GX crankset is engineered for 2x10 shifting performance. Flawless shifting means you’ll never again compromise your speed and power in unpredictable off-road terrain. No more missed shifts. X-GLIDE puts you in the right gear, right now. - 6000 series AL - X-GLIDE 2x10 shifting technology • Weight: 799g (GXP, 175mm, 36/22T) • Chainguard included, but not shown

With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

• Aluminum clamp with a chromoly bolt

Of all the components that make up a mountain bike drivetrain, the shifter doesn't exactly get a lot of spotlight time. But, as the rider's literal command and control center, the GX Eagle shifter is more than worthy of recognition. With intuitive thumb actuated triggers, the positive feel gives the right rider input to make shifts crisp and discernible every time. What's more, its already legendary reliability continues for all-day epics and all-time experiences. Plus, it features an aluminum trigger that's ready for inevitable punishment, as well as MatchMakerX compatibility. Precise and durable, it's the hard-working, no-compromise shifter keeping riders in the right gear, every ride. - Aluminum trigger designed for a positive lever feel - Master GX Eagle master colorway to match all cassette and chain colors as part of Eagle Colorsystem - Matchmaker compatible

It might look normal from the outside, but the engineering inside this incredible new chain design is anything but normal and it makes possible a gear range previously found only in 2-chainring drivetrains. And it’s also the biggest contributor to the Eagle drivetrain’s ultra-smooth, precise, durable and quiet performance. The Eagle chain’s links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. HARD CHROME technology extends the chain’s optimal performance life, and a Titanium Nitride coating on the Gold and Black models decreases corrosion and further reduces friction.