White Lightning's Crystal Grease is so pure and innovative, it's clear. Premium base oils allow this 100% waterproof grease to provide smooth, long-lasting lubrication and the clear color won't stain or hide damage and contaminants. And, you'll feel good knowing that it's biodegradable, non-toxic, and won't harm carbon, seals and other crucial components.

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

- Highly concentrated. Activate with water for incredible results or dilute for lighter degreasing tasks. - Engineered to fight its way to metal surfaces and stay there, then attack and break free the bonds holding oils, soils, and grime in place, and finally dissolve and contain to carry it all away. - Safe on any material, fully biodegradable, solvent-free, plant-derived, and zero-VOC. Degreaser 13 is a highly concentrated degreaser engineered for use with water to tackle tough degreasing tasks. Developed from scratch, specifically for the challenges of bicycle drivetrain degreasing, the advanced formula is engineered to fight its way to metal surfaces and stay there, then attack and break free the bonds holding oils, soils, and grime in place, and work together with water to dissolve and contain to carry it all away. Activate with water for incredible results on tough jobs or dilute for lighter degreasing tasks. Fully water soluble and further activated by scrubbing, agitation, and rinsing, the result is a spotless residue-free drivetrain. The advanced formula is also safe to use on any material, fully biodegradable, solvent-free, plant-derived, and zero-VOC.

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

The Muc-Off Bike Care Duo Kit covers Stage 1 and 2 in the Muc-Off cleaning system. Our award winning Nano Tech Bike Cleaner cuts through dirt, mud and grime quickly and safely without the need for acids or dangerous chemicals. This unique formula is also 100% biodegradable so it's safe for your bike and the planet. After you've given your bike a good clean with the Nano Tech Bike Cleaner, it's time to add some protection. Muc-Off Bike Spray is the ultimate post-wash water dispersant. Not only does Bike Spray rid your bike's frame and components of moisture, but it also leaves a non-sticky layer of protective PTFE to prevent rust and corrosion. It also makes future cleaning and maintenance a breeze. - Contains Nano Tech Bike Cleaner, Premium Formula PTFE Bike Spray and cleaning sponge

Muc-Off Waterless Wash is a highly advanced, easy to use spray which cleans and polishes in seconds without the need for water. It details your whole bike, motorcycle or car in seconds leaving behind a streak free shine. Its innovative formula is designed to encapsulate any surface dirt to prevent scratching. Use it to remove light contaminants in between major washes. - Cleans and polishes in one application - No need for water - No residual dust or streaks - Powder-free - Great for eBikes - no danger of getting electrical contacts wet

- New high-pressure turbo spray - Easily cuts through tough grease in seconds - No rinse, heavy duty formula - Can be used on chains, gears and individual components - Works on tough waterproof grease and chain wax

Designed to leave zero residue after application, Finish Line’s Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line’s Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts. - Engineered to rapidly clean disc brake rotors and pads - Acetone-free formula

- A super duty cleaner that strips the toughest residues, Including brake rotor surface grime - Dries fast with no oily residue left behind - Exceeds all federal v.O.C. And california carb regulations - Law prohibits orm-D materials from shipping by air

Our Classic Freehub Grease is specifically designed for all freehubs that require a lightweight grease. These style hubs we like to call the more mechanical hubs. Unlike the simpler, fewer parts of the Pawl style hubs. Dumonde Tech Freehub Grease performs in a broad temperature range from the heat of summer to the frigid temperatures of the north. "Pour Point" of Freehub Grease is -30 degrees. Follow the manufacturer's specification for the volume required in your freehub body to experience the superior performance of Dumonde Tech's Freehub Grease. Our Freehub Grease is Exclusively used by: Industry 9 "Legacy", "Hydra" and "101" hubs and Stan's NoTubes, Hermes Sport, and Hawk Racing. Used, endorsed and/or recommended by: Crank Brothers, Boyd Cycling, Ritchey Design and Paul Components. Campagnolo North America recommends our Freehub Grease as an alternative to their lb-100 Grease as it is no longer available in North America. Our Freehub Grease is a proven replacement for any hub or wheel company's grease.

HG, Needle Applicator, Chain lube,18 ga

Dumonde Tech’s Classic Liquid Grease is a high-performance replacement for traditional viscosity grease. Liquid Grease reduces the coefficient of friction through Polymer Technology. Liquid Grease polymerizes and bonds to the surface providing extremely low drag. Liquid Grease is attracted to heat to provide lubrication at critical locations. Highly recommended for steel and ceramic cartridge bearing. Eliminates drag that grease-packed bearing experience for a drag-free bearing, even in the freezing temperatures. Ideal for suspension fork legs, full suspension pivots, wheel bearings, and roller bearing. A proven application for spoke nipple and rim interface. Can be used as a chain lube for very extreme muddy conditions of mountain bike and cyclocross.

Our Classic ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. - “Riding in” forms an extremely low-friction plating. - Plating bonds to chain; can’t be washed off! - Components stay cleaner, last longer, and run quieter. - Extremely durable, outlasts all other chain lubes! - Environmentally sensitive and saves money. - To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions. The two formulas are compatible and may be used interchangeably. We recommend the Original Bicycle Chain Lube for mountain bikes, cyclo-cross, and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, and seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions..

We worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X LITE Bicycle Chain Lubricant Like our Regular chain lube, cyclists who tested or raced using PRO X Lite, report it to perform better then any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X Lite brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little is used to move your bike parts. - 10 time high lubricity the Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, last longer, runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X LITE is the lighter version to our PRO X REGULAR chain lubricant. PRO X LITE is ideal for a road bike, wet or dry, and extreme dry off-road trail conditions or over cyclist you are prone to over applying. PRO X LITE can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in extreme cold conditions.

Dumonde Tech worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X REGULAR Bicycle Chain Lubricant Everyone who has tested or raced using PRO X reports that performance is better than any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X REGULAR brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little effort is used to move your bike parts. - 10 times higher lubricity than Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, lasts longer, and runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X REGULAR is the heavier version to our PRO X LITE chain lubricant. PRO X REGULAR is ideal for Mountain Bike, Cyclocross, and all extreme condition, while maintaining a clean drive train. PRO X REGULAR can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, used sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions.

A cream to help assist the break-in process and keep leather supple, specially formulated from natural ingredients to condition, preserve and shower-proof your saddle. Proofide is the only substance that should be used to care for your Brooks Leather Saddle, specially formulated from natural ingredients to condition, preserve and showerproof. Apply a little of this leather saddle cream to the finished side of the leather. Allow to permeate until dry and then polish off. Also apply Proofide to the underside of the saddle, but leave this coating on to protect against dirt and moisture. It should be used several times during the ‘breaking-in’ period and periodically (3-6 months) thereafter. It is recommended to polish the saddle with a soft cloth before first use.

- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air

Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Finish Line Showroom Polish is made with Teflon fluoropolymer and uses DuPont Teflon Surface Protector technology. Provides a brilliant shine plus long term protection on all surfaces of a bicycle. 100% safe for all plastics, rubbers and carbon fiber parts.

Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.

Finish Line's Super Bike Wash quickly cleans dirt, mud, clay, road grime and chain gunk off your bike. Its five different cleaning agents work together to create a high-speed cleaning system. There are also three different rust and oxidation inhibitors to protect metal surfaces from rusting and corrosion. It's also safe for all bike surfaces.

Citrus Cleaner/Degreaser provides a powerful foaming action that cuts through and cleans the toughest grease, dirt and oil. - Easy to use trigger allows user to lay down a layer of foam that will cling and penetrate into the part to provide superior cleaning performance - Quick evaporation technology leaves no residue and needs no rinsing - Biodegradable formula

Tri-Flow Superior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin, visible, coating that repels water as it lubricates. - Specifically designed for lubricating chains - Applicator is not included or needed because of the product's consistency

Finish Line's Gear Floss is the ultimate detailing tool, perfect for cleaning your cassette, chainrings, derailleur pulleys, hubs and all those hard-to-reach nooks and crannies. Made with microfiber, it works by attracting and capturing dirt, grease and particles inside its star-shaped grooves. Each package has 20, 20-inch-long ropes that are washable and reusable.

Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Rated "5 Chainrings, Exceptional Grease" by Bicycling Magazine, it's very slick and very tough and lasts as much as 5 times longer than petroleum grease.